Light and shadow: cast shadows explained

Updated:

A cast shadow is the dark shape an object throws onto a nearby surface because it blocks the light. To draw one, work out the light direction, draw the shadow shape pointing directly away from the light, make it darkest where it touches the object, and let it fade and soften as it moves away.

What is a cast shadow, and how is it different from the shading on the object?

Every lit object carries two kinds of shadow. The form shadow, also called the core shadow, sits on the object itself. It marks where the surface turns away from the light. The cast shadow lands on something else, such as the table or the wall behind.

Mixing the two up is a common beginner problem. If you shade the object and the table the same way, the two shapes merge. Keep them apart by treating them as separate steps: first the shading on the object, then the shadow on the ground.

How does light direction decide the shape?

The cast shadow always points away from the light. Imagine a straight line from the light, past the top of your object, down to the surface. Where that line lands is the tip of the shadow.

  • Light from the left: shadow falls to the right.
  • Low light (like late afternoon): the shadow stretches long.
  • High light (like a lamp above): the shadow is short and sits right under the object.
  • Light from the front: the shadow falls behind the object and is mostly hidden.

Write a small arrow on your page for the light direction before you shade anything, so every shadow on the page agrees.

Shape also follows the object. A sphere casts an oval shadow, a cube casts a shape with straight edges, and a cylinder casts a long, stretched rectangle with a rounded end. The shadow also bends where the surface bends, for example when it travels over the folds of a cloth.

Why do shadow edges look sharp in one spot and soft in another?

Real shadows are rarely hard-edged all the way. A light source that is not a single point creates an umbra, the fully dark core, and a penumbra, where only part of the light is blocked. Wikipedia notes that a point-like source casts only an umbra, so the soft penumbra exists because lights have a finite size.

In practice, this gives you a useful guideline:

  • Near the object, where the shadow starts, the edge is sharper and the tone is darkest.
  • Further away, the shadow widens, softens and becomes lighter.

Use firm, dark pencil where the object touches the surface and lighten your strokes as you move away. A cast shadow that is uniformly dark with a hard edge all the way looks like a cut-out.

How do I draw a cast shadow, step by step?

  1. Pick the light direction and mark it with an arrow.
  2. Lightly outline the shadow shape by projecting the main points of the object away from the light.
  3. Fill it with a light, even layer. Hatching works well; LibreTexts describes denser lines as reading darker.
  4. Darken the contact area where the object meets the surface. This anchors it to the ground.
  5. Fade the far edge by lifting pressure and spacing your lines out.
  6. Add reflected light on the object's bottom edge, a thin lighter band between the core shadow and the cast shadow.

Step 6 is the one most people skip, and it is what makes the shadow look like it belongs to a real object. Our guide to how to shade with pencil covers the other zones on the object.

What mistakes make cast shadows look wrong?

  • Shadows in two directions. Check your arrow.
  • Floating objects. If there is no dark contact point, the object looks as if it hovers above the table.
  • A uniform black. Vary the tone from dark near the object to light further away.
  • A shape that ignores the object. The shadow of a tall narrow object should be long and narrow.
  • Forgetting the surface. If the table is white and the shadow is grey, the edge of the table also needs to be defined.

Which lessons can I use to practise?

The classic exercise is a ball on a flat surface. The apple lesson teaches a round object and its shadow together, and the fish lesson adds a soft cast shadow under a floating shape. For a harder test, the house lesson has long cast shadows from a block, and a ball on a folded cloth shows how a shadow follows a more complex surface.

To check where your own shadows should go, the value study tool can show a photo with only a few tones, so you can see the shape of the light and dark areas before you draw them. For more on tone, read value scale in drawing, and find the rest of the series in the shading and light topic hub.

How do I check that my shadows are consistent?

Before you finish, point at each shadow with your pencil and trace a line back to the light arrow you drew at the start. Every cast shadow should lie along a line pointing away from the light. Then squint at the page: the shadows should read as one family of dark shapes, with the darkest bits where objects touch the surface. If one shadow looks odd, it usually points the wrong way or lacks a dark contact edge, and both are quick to fix with a pencil.

If you want a lesson that talks you through shadows on real paper, Guidart (free on iPhone and iPad) has voice-guided drawings and a Light and Shadow stage in its journey. Afterwards you can photograph your drawing for an AI score and tips. The AI score compares your photo with the original; it is not real-time and not a human teacher. Every free drawing and one premium drawing a day are free; Premium has a 7-day free trial and auto-renews (cancel in iOS Settings).

Sources

  1. Wikipedia, Umbra, penumbra and antumbra
  2. LibreTexts, Drawing Basics: Techniques in Mark Making

Frequently asked questions

What is the difference between a form shadow and a cast shadow?

A form shadow (or core shadow) sits on the object itself, where its surface turns away from the light. A cast shadow falls onto another surface, such as the table, because the object blocks the light.

Why are some shadow edges sharp and others soft?

A light source with a size creates a fully dark centre (the umbra) and a partly lit fringe (the penumbra), so edges are often soft. The shadow is usually crispest where it touches the object and softer as it moves away.

Which direction should a cast shadow go?

Directly away from the light. If the light is on the left, the shadow falls to the right. A lower light makes a longer shadow, and a higher one makes it shorter.

Should a cast shadow be black?

Rarely. It is usually darkest near the object and lighter further out, so vary the tone instead of filling the shape with one flat dark.

Related pages

GuidartLearn to draw on paper, free on iPhone and iPad
Download