Pencil grades chart

See every pencil grade from 9H to 9B in order, learn what each family is good for, and print a test sheet for your own pencils.

How pencil grades work

A graphite pencil is a mix of graphite and clay. More clay makes the lead harder and the mark lighter. More graphite makes it softer and darker. Manufacturers describe this with a scale of letters and numbers. On the hard side the scale uses H, with higher numbers going harder: 2H, 3H and so on up to 9H. On the soft side it uses B, with higher numbers going softer and darker: 2B up to 9B. In the middle sit HB and F.

The chart on this page lists every grade in order from 9H, the hardest and lightest, through H, F and HB, to 9B, the softest and darkest, with a short note on what each family is good for.

What each family does

Hard pencils (9H to H). They make light, fine marks and hold a sharp point for a long time. They suit technical drawing, precise outlines and the first light lines of a drawing that you want to erase later. Used with too much pressure they can dent the paper.

F and HB. F means fine point and sits between hard and medium. HB is the balanced middle: neither too light nor too dark, a good grade for everyday sketching and writing.

Soft pencils (B to 9B). They lay down a dark, smooth tone with little effort and are ideal for shading and expressive dark areas. They wear down fast and smudge more easily, so keep a clean sheet of paper under your hand.

An important caveat

There is no single international standard that fixes how dark a 2B or how hard an H must be. Different brands have their own formulas, so the same grade can look different from one maker to the next. Even within a brand, paper and pressure change the result. Treat the chart as a guide to order, not an exact measurement, and use the test sheet to learn how your own pencils behave.

The printable test sheet

The test sheet gives each grade its own row with:

  • a box to fill with hatching,
  • three boxes to try light, medium and firm pressure,
  • a dashed line for a single line stroke.

Type the pencil brand and the paper at the top and they are printed on the sheet. Choose a common set (4H to 6B), a sketching set (2H to 6B) or all 20 grades. Draw every grade with the same pressure and the same kind of stroke, and you will see exactly how your brand steps from light to dark.

Making a fair test

  1. Use the paper you normally draw on.
  2. Sharpen every pencil to a similar point.
  3. Draw each box with the same stroke and as even a pressure as you can.
  4. Do the pressure boxes last, from light to firm.
  5. Date the sheet and keep it beside your pencil case.

Choosing grades for your drawing

For a portrait or a still life, many artists use a small spread: a hard grade for light planning lines, HB for general drawing, 2B and 4B for mid tones, and 6B for the darkest darks. For technical or architectural drawing, harder grades give crisp lines. For quick sketches an HB or a 2B alone can go a long way.

The test sheet is built in millimetres and printed without a browser margin. A 10 cm calibration line with centimetre ticks sits at the bottom; print at 100% / actual size and measure it with a ruler to be sure. The boxes keep a 10 mm margin so most home printers will not clip them.

After you have tested your pencils, the value scale shows how to place their tones on a clear scale of light and dark, and the shading worksheets give you exercises to use them.

Frequently asked questions

What do H, B, F and HB mean?

H stands for hard, B for black (soft and dark), F for fine point, and HB for the middle between hard and black. A higher number before the letter means more extreme: 2H is harder than H, and 4B is softer and darker than 2B.

Is a 2B always the same darkness?

No. There is no binding international standard for these grades, so each maker sets its own. A B from one brand can look like a 2B from another. Test your own pencils on your own paper.

Which pencils should I buy first?

A small set is enough: an HB for general work, a 2B or 4B for shading and a 2H for light construction lines. Add more once you know what you reach for.

Why does my pencil look lighter on some paper?

Paper texture changes how much graphite is deposited. Smooth paper gives a more even, slightly lighter tone; toothy paper holds more graphite and looks darker and grainier.

How is the test sheet used?

Print it, type your brand and paper at the top, and draw each grade in the boxes with the same pressure. Keep the sheet to compare other brands later.

This tool runs entirely in your browser. Nothing you add to it is uploaded.

Related tools

GuidartLearn to draw on paper, free on iPhone and iPad
Download