Hatching and cross-hatching: how to build tone with lines

Updated:

Hatching is shading with closely spaced parallel lines, and cross-hatching is the same idea with a second set of lines drawn over the first at a different angle. The closer the lines sit, and the more layers you add, the darker the area looks.

What is hatching in drawing?

Wikipedia describes hatching as creating shading or tonal effects with closely spaced parallel lines. Line quantity, thickness and spacing all change how light or dark an area reads. Dense, heavy lines look darker, while sparse lines look lighter. LibreTexts adds that hatching can suggest gradations of light and shadow without a solid fill.

That is a powerful idea for a beginner, because you do not need to blend anything. You control tone with spacing alone: space the lines wide where the light hits, and pack them in where the form turns into shadow.

Hatching is one of five main approaches covered in our shading techniques overview, alongside stippling, scumbling and smooth blending.

What is cross-hatching and how is it different?

Cross-hatching layers one set of lines over another. According to Wikipedia, the simplest version lays a second set at 90 degrees to the first. Each added layer makes the area darker, and the crossing lines build texture as well as tone. LibreTexts notes that adjusting the angle and spacing of the crossing lines lets you build more complex textures than single-direction hatching can.

Wikipedia traces hatching back to the Middle Ages, with cross-hatching developing in fifteenth-century prints and engraving, and Albrecht Dürer is credited there with perfecting it in engraving and woodcut. It is especially important in linear media such as drawing, engraving and etching, and works just as well with a pencil.

A practical rule: use plain hatching for light and middle tones, then add cross-hatching layers only in the darkest areas. That keeps the drawing airy and gives you a visible range.

How do I draw clean, even lines?

Even lines come from a loose wrist and a consistent motion.

  1. Hold the pencil further back than for writing, so the stroke comes from your forearm.
  2. Flick each line in one quick, continuous movement, lifting at the end so it tapers.
  3. Rotate the paper so the lines always travel in the direction that feels most natural.
  4. Keep the angle steady. Use a light guide mark if needed.
  5. Aim for even spacing, roughly the width of a line.

Do not try to make a perfect gradient on your first try. Fill a small box with hatching that gets denser from left to right, and compare it to the value scale you made earlier. Our value scale worksheet and shading worksheets give you boxes to fill.

How do I build dark values with layers?

Work in layers, like this:

  • Layer 1: light hatching across the whole shaded area, all in one direction.
  • Layer 2: a second set of lines at a new angle, skipping the lightest region.
  • Layer 3: a third set, at yet another angle, only in the darkest region.
  • Final accents: a few very dark lines or small crosses right where two surfaces meet.

Using different angles for each layer avoids a moiré effect. Wikipedia notes that layers meeting at slight angles can create rippling moiré patterns, so choose clear angles such as 45 or 90 degrees apart.

Keep your pencil sharp. A dull point makes thick lines that fill in too quickly, and you lose the ability to build tone in small steps.

How do I make hatching follow the form?

Straight parallel lines work well on flat planes such as the side of a box, but on a round object they can flatten the shape. Contour hatching uses curved lines that follow the surface. Wikipedia describes lines that wrap around the form and follow its light.

Try it on a sphere: instead of straight diagonals, curve each line like a latitude line on a globe. The curved shading of the apple lesson is a good test. For a cylinder, let the lines wrap around the form, as on the column of the cactus lesson.

For textures, hatching shines on tree bark, where the direction and uneven spacing of your lines can match the grain of the wood.

What mistakes should I avoid?

  • Hatching everything at the same angle, which makes separate objects blend together.
  • Pressing hard on the first layer. You cannot lighten it later.
  • Uneven spacing, which creates stripes instead of smooth tone.
  • Over-darkening early. Leave room for your darkest accents.
  • Lines that stop short or overshoot the edge, which makes the shape fuzzy. Let them end cleanly at the boundary.

How can I practise?

Use five minutes a day for a week. Day one, a single box with hatching, day two, cross-hatching, day three, a sphere with contour hatching, day four, a cube with a different angle on each face, day five, a small bark or fabric patch. Pair this with the drawing practice sheets for line control. All of this lives in the shading and light topic hub, and value scale in drawing explains how to check your results.

How do I know when a hatched drawing is finished?

Squint at the page. Hatching can look busy up close, but from a distance the lines should merge into smooth tone, with clear light and dark areas. If the shape looks flat, add a darker layer where two surfaces meet. If it looks heavy, stop adding layers and leave the paper white in the highlights. Photographing the drawing and viewing it small on your phone is a quick way to judge the overall tone without the lines distracting you.

If you want a lesson that talks you through hatching on real paper, Guidart (free on iPhone and iPad) has voice-guided drawings, and its journey lessons include Mastering Hatching: Tree Bark. Afterwards you can photograph your drawing for an AI score and tips. The AI score compares your photo with the original; it is not real-time and not a human teacher. Every free drawing and one premium drawing a day are free; Premium has a 7-day free trial and auto-renews (cancel in iOS Settings).

Sources

  1. Wikipedia, Hatching
  2. LibreTexts, Drawing Basics: Techniques in Mark Making

Frequently asked questions

What is the difference between hatching and cross-hatching?

Hatching uses a single set of closely spaced parallel lines. Cross-hatching adds one or more further sets of lines over the first, at a different angle, to make the area darker and richer.

Which direction should my hatching lines go?

Pick one consistent direction for each surface, or let the lines follow the form, which is called contour hatching. Changing direction between neighbouring shapes helps them stand apart.

Do I need a special pen or pencil?

No. Hatching works with pencil, pen, charcoal or any linear medium. A sharp pencil keeps lines thin so you can place them close together.

How do I stop my hatching looking messy?

Keep your wrist loose, flick each line in one smooth motion, and aim for even spacing. Practise rows of parallel lines on a scrap page before you use them in a drawing.

Related pages

GuidartLearn to draw on paper, free on iPhone and iPad
Download