Perspective grid
Print a 1, 2 or 3-point perspective grid with a horizon line and light guide lines, and draw boxes, rooms and streets over it.
What a perspective grid does
Perspective is the set of rules that makes a flat sheet of paper look three-dimensional. The most important rule is simple: lines that are parallel in real life appear to meet at a vanishing point on the horizon as they go away from you. A perspective grid prints those guide lines for you, so you can practise drawing boxes, rooms, roads and buildings without first working out the angles by hand.
This tool prints a clean sheet with a horizon line and rays from each vanishing point in light grey. You draw over the rays in pencil. The grey guides are meant to be seen through your lines, not to compete with them.
Choose your type
One-point perspective has one vanishing point on the horizon. It suits corridors, roads, railway tracks and the inside of a room seen straight on. The front surfaces stay flat and square; only the depth lines converge.
Two-point perspective has two vanishing points on the horizon, usually far apart. It suits buildings, boxes and furniture seen from a corner. Vertical edges stay vertical, and the two sets of side edges run towards the left and right points.
Three-point perspective adds a third point above or below the sheet. Verticals now converge too, which is what you see when you look up at a skyscraper or down from a high window. Use the "above" or "below" setting to choose where the third point lives and how far away it is: a third point below the horizon gives a bird's-eye view looking down, and one above the horizon gives a worm's-eye view looking up.
How to use the sheet
- Pick 1, 2 or 3 points.
- Choose A4 or Letter and the orientation. Portrait works well for towers; landscape for streets.
- Move the horizon height to set eye level.
- For two or three points, change the spread to move the side points apart. A wider spread gives gentler angles; a narrow spread gives dramatic, distorted views.
- Set the line density. Fewer lines keep the sheet clean; more lines make it easier to place edges anywhere.
- Print at 100% / actual size.
A first exercise
On a one-point sheet, draw a rectangle for the end of a corridor near the vanishing point. Connect each corner of a larger rectangle to the vanishing point with a ruler; those are the floor, ceiling and wall edges. Close the shape and you have a room. On a two-point sheet, draw one vertical line for the nearest corner of a box, then run its top and bottom to each vanishing point. Add the far vertical edges and the box appears.
Print accuracy
All lines on the sheet are drawn in real millimetres. The page uses no browser margin, and a 10 cm calibration line with centimetre ticks sits in the bottom margin. Print with "Actual size" or 100% scale, never "Fit to page". Then lay a ruler on the line: it should measure 10 cm. If your printer cannot print to the very edge, the guide lines stay inside a 10 mm margin so nothing important is cut.
Tips for better results
- Keep the horizon in a sensible place for your subject; do not centre it by habit.
- Draw boxes first. Almost every object can be built from boxes, then cut and rounded.
- Use a long ruler for the long lines and draw them in one pass.
- Check that vertical edges stay vertical (in one and two-point perspective).
- Print several sheets with different horizons and vanishing point spreads, and compare the effect.
Related
To check light and dark on your finished scene, try the value scale. If you want to enlarge a reference photo before drawing, the grid tool prints a matching numbered grid.
Frequently asked questions
What is the difference between 1, 2 and 3-point perspective?
In one-point perspective, parallel lines going away from you meet at a single vanishing point, so the front face stays square. Two-point uses two vanishing points on the horizon, so you see a corner of the object. Three-point adds a third point above or below the horizon for strong looking up or down views.
Where should the horizon go?
The horizon is your eye level. A low horizon makes objects look tall and you look up at them. A high horizon looks down on the scene. Slide the horizon height and print a few versions to see the effect.
Can the vanishing points be outside the paper?
Yes. With two and three points, the points are often far apart. Increase the spread and the points move off the sheet, while the guide lines still run from them in the right directions.
Will it print at the right size?
Yes. The sheet is built in millimetres and prints at actual size on A4 or Letter. A 10 cm calibration line at the bottom lets you check the print with a ruler.
This tool runs entirely in your browser. Nothing you add to it is uploaded.
Related tools
Printable drawing steps
Choose a drawing, print its step-by-step pictures on A4 or Letter, and add a colouring page of the finished drawing.
Value scale worksheet
Print a white-to-black value scale with empty boxes to match with your pencil, and train your eye for light and dark.
Drawing practice sheets
Print warm-up sheets with light dashed guides for lines, waves, circles, ellipses, spirals and zigzags, and build a steady hand.
Shading worksheets
Print shading exercises for hatching, cross-hatching, scribbling and stippling, smooth gradients, and basic forms with a light direction.