Grid drawing tool

Add a numbered grid to a reference photo and print the matching blank grid for your paper, at true size, in centimetres or inches.

What the grid method does

The grid method is one of the oldest ways to copy a picture accurately. You divide the reference into squares, divide your paper into the same number of squares, and then draw what you see in each square on its own. Instead of judging a whole face or landscape at once, you only have to judge a small piece: where a line enters the square, where it leaves, how dark the patch is. Because every square is matched to a square on the paper, proportions stay right even when you are enlarging.

This tool takes care of the fiddly part. Pick a photo, choose how big the cells should be, and it draws the grid over the photo on screen. Then it prints a matching blank grid, in light grey, sized for your paper, so your drawing starts with exactly the same layout.

How to use it

  1. Choose a photo from your device. If you do not have one yet, pick a paper shape such as 3:4 and print a blank grid to use with a photo you already have in print.
  2. Pick your paper (A4 or Letter), the orientation and a margin. The default margin is 10 mm so nothing gets cut off by the printer.
  3. Decide how to size the grid. You can set the cell size (for example 2 cm), the number of columns or rows, or the finished drawing width.
  4. Switch on cell numbers (A1, B1 and so on) so you always know which square you are in. Add cell diagonals if you like to place a line by its crossing point.
  5. Choose what to print: the blank grid for your paper, or the photo with the grid for reference.
  6. Print at 100% / actual size, then measure the calibration line to check.

Centimetres or inches

The cell size can be typed in centimetres or inches. Switching units converts your current numbers, so a 2 cm cell becomes about 0.79 in. Nice round numbers are easier to work with: 2 cm or 0.75 in cells are common choices. Smaller cells give more detail and more squares to fill; larger cells are quicker and suit simple subjects.

Drawing larger than one sheet

For a poster-sized copy, use Finished drawing width. The tool works out how many sheets wide and tall your drawing will be, and prints each tile with the grid lines continuing across page boundaries. Every sheet shows a page number and its column and row position, and small crop marks at the four corners of the grid area. Because each sheet keeps a margin for your printer, cut each sheet along its crop marks, then lay the trimmed sheets edge to edge in the order shown and tape them on the back. The grid lines and cell numbers continue across the seams. The tool limits a tiled drawing to 12 sheets, and the smallest cell is 5 mm.

Scale calculator

The Scale calculator tab answers the question that comes up every time you enlarge a drawing. Enter the original width and height, the width you want, and the cell size on the original. It tells you the scale (for example 4×), how tall the finished drawing will be, and what size each cell must be on your paper.

Rule of thirds

Instead of a full grid, you can overlay the rule of thirds on the photo: two vertical and two horizontal lines that divide the frame into nine parts. This is not for copying but for composing: place the main subject near an intersection and check whether your reference follows the same idea.

Printable tools are only useful when the printed size is right. Every sheet from this tool is built in millimetres and prints with no extra page margin from the browser. At the bottom you will find a 10 cm calibration line with centimetre ticks. Print at 100% / actual size, lay a ruler along the line, and it should read 10 cm. If it does not, turn off "fit to page" or "scale to fit" in the print dialog and print again.

Tips for better results

  • Pick a reference with clear shapes and a good range of light and dark.
  • Draw the grid on your paper lightly or use the printed light-grey grid so the lines can disappear under your shading.
  • Work square by square, but check the whole drawing from a distance now and then.
  • Start with the outlines that cross cell edges; they give you reliable anchor points.
  • Erase or ignore the grid only after the drawing is finished.

Looking for a different way to match proportions on paper? Try the perspective grid for room and street scenes, or the value scale to check your light and dark tones against a printed reference.

Frequently asked questions

Is my photo uploaded anywhere?

No. The photo is opened in your browser and stays on your device. The grid is drawn over it locally, and nothing is sent to a server.

Why must I print at 100%?

The grid is drawn in real millimetres. If the print dialog shrinks the page to fit, your cells are no longer the size you chose. Each sheet carries a 10 cm line; measure it with a ruler to confirm the print is true to size.

How do I make a drawing bigger than one sheet?

Choose "Finished drawing width" and type the size you want. The tool splits the grid across as many sheets as needed and labels each page with its column and row so you can tape them together.

Can I use inches instead of centimetres?

Yes. Switch the units to inches and type the cell size as a fraction of an inch such as 0.5 or 0.75. The paper size, cell size and drawing size all follow the unit you pick.

What is the difference between the photo grid and the blank grid?

The photo grid is for looking: it sits on your reference. The blank grid is for drawing: it has the same number of cells, in light grey, at the size you will actually draw.

This tool runs entirely in your browser. Nothing you add to it is uploaded.

Related tools

GuidartLearn to draw on paper, free on iPhone and iPad
Download